Show simple item record

dc.contributor.authorR. L. Clark
dc.date.accessioned2017-05-08T23:52:56Z
dc.date.available2017-05-08T23:52:56Z
dc.date.copyrightSeptember, 1997
dc.date.issued1997
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26238#390_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/118400
dc.description.abstractColocated, output feedback is commonly used in the control of reverberant systems. More often than not, the system to be controlled displays high modal density at a moderate frequency, and thus the compliance of the out-of-bandwidth modes significantly influences the performance of the closed-loop system at low frequencies. In the assumed modes approach, the inclusion principle is used to demonstrate that the poles of the dynamic system converge from above when additional admissible functions are used to expand the solution. However, one can also interpret the convergence of the poles in terms of the zeros of the open-loop system. Since colocated inputs and outputs are known to have interlaced poles and zeros, the effect of a modification to the structural impedance locally serves to couple the modes of the system through feedback. The poles of the modified system follow loci defined by the relative location of the open-loop poles and zeros. Thus, as the number of admissible functions used in the series expansion is increased, the interlaced zeros of the colocated plant tend toward the open-loop poles, causing the closed-loop poles to converge from above as predicted by the inclusion principle. The analysis and results presented in this work indicate that the cumulative compliance of the out-of-bandwidth modes and not the modes themselves is required to converge the zeros of the open-loop system and the poles of the closed-loop system.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAccounting for Out-of-Bandwidth Modes in the Assumed Modes Approach: Implications on Colocated Output Feedback Control
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2801270
dc.journal.fristpage390
dc.journal.lastpage395
dc.identifier.eissn1528-9028
dc.keywordsFeedback
dc.keywordsPoles (Building)
dc.keywordsFunctions
dc.keywordsClosed loop systems
dc.keywordsOpen loop systems
dc.keywordsIndustrial plants
dc.keywordsFrequency
dc.keywordsDynamic systems
dc.keywordsDensity AND Impedance (Electricity)
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1997:;volume( 119 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record