Show simple item record

dc.contributor.authorJ. D. Stienmier
dc.contributor.authorS. C. Thielman
dc.contributor.authorB. C. Fabien
dc.date.accessioned2017-05-08T23:52:52Z
dc.date.available2017-05-08T23:52:52Z
dc.date.copyrightDecember, 1997
dc.date.issued1997
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26241#650_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/118362
dc.description.abstractThis article presents the design, dynamic analysis, and control of a flywheel energy storage system. At the heart of the system is a hybrid magnetic bearing. The bearing consists of ring and disk shaped permanent magnets, and a synthetic ruby sphere on a sapphire plate. The bearing is shown to be stable without active control. Equations of motion for the flywheel are derived in a sensor based coordinate system. The resulting equations are non-singular around the nominal operating condition and are feedback linearizable without the need for a coordinate transformation. A method of modeling rotor imbalance as a set of sinusoidal disturbances of magnitudes that do not depend on rotational speed is also presented. To reject large external disturbances active control is applied to the flywheel. Two nonlinear control laws are applied and are shown to improve the initial condition response of the inherently stable system.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnalysis and Control of a Flywheel Energy Storage System With a Hybrid Magnetic Bearing
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue4
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2802374
dc.journal.fristpage650
dc.journal.lastpage656
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1997:;volume( 119 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record