Show simple item record

dc.contributor.authorT. L. Panontin
dc.contributor.authorM. R. Hill
dc.date.accessioned2017-05-08T23:51:25Z
dc.date.available2017-05-08T23:51:25Z
dc.date.copyrightFebruary, 1996
dc.date.issued1996
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28365#86_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/117584
dc.description.abstractThe paper examines the problems associated with applying proof-test-based life prediction to vessels made of high-toughness metals. Two A106 Gr B pipe specimens containing long, through-wall, circumferential flaws were tested. One failed during hydrostatic testing and the other during tension-tension cycling following a hydrostatic test. Quantitative fractography was used to verify experimentally obtained fatigue crack growth rates and a variety of LEFM and EPFM techniques were used to analyze the experimental results. The results show that: plastic collapse analysis provides accurate predictions of screened (initial) crack size when the flow stress is determined experimentally; LEFM analysis underestimates the crack size screened by the proof test and overpredicts the subsequent fatigue life of the vessel when retardation effects are small (i.e., low proof levels); and, at a high proof-test level 2.4 × operating pressure), the large retardation effect on fatigue crack growth due to the overload overwhelmed the deleterious effect on fatigue life from stable tearing during the proof test and alleviated the problem of screening only long cracks due to the high toughness of the metal.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleProof-Test-Based Life Prediction of High-Toughness Pressure Vessels
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842168
dc.journal.fristpage86
dc.journal.lastpage94
dc.identifier.eissn1528-8978
dc.keywordsPressure vessels
dc.keywordsToughness
dc.keywordsFracture (Materials)
dc.keywordsFatigue cracks
dc.keywordsFatigue life
dc.keywordsVessels
dc.keywordsHydrostatic testing
dc.keywordsMetals
dc.keywordsTension
dc.keywordsFractography
dc.keywordsPipes
dc.keywordsCollapse
dc.keywordsStress
dc.keywordsPressure AND Flow (Dynamics)
dc.treeJournal of Pressure Vessel Technology:;1996:;volume( 118 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record