Show simple item record

dc.contributor.authorY. Kaji
dc.contributor.authorI. Nishiguchi
dc.contributor.authorY. Miyamoto
dc.contributor.authorI. Ioka
dc.date.accessioned2017-05-08T23:51:23Z
dc.date.available2017-05-08T23:51:23Z
dc.date.copyrightMay, 1996
dc.date.issued1996
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28368#194_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/117561
dc.description.abstractThe effect of the initial ovality, wall thickness, and pressure level on the collapse time of a heat transfer tube subjected to both constant and cycled external pressure at elevated temperature was examined experimentally and analytically. The creep deformation of the tube obtained by FEM code and the simplified method was a good approximation. The simplified method proposed by Nishiguchi et al. is an effectual method in the estimation of the creep buckling deformation and the collapse time of the tube under external pressure at elevated temperature as compared with the experimental results and the FEM. Though many cracks initiated by creep collapse were observed on the outer surface of a few test tubes, the cracks did not pass through the tube thickness, and leak tightness was maintained despite a collapse for all tubes tested.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEstimation of Creep Buckling Deformation Under External Pressure at Elevated Temperature
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842180
dc.journal.fristpage194
dc.journal.lastpage197
dc.identifier.eissn1528-8978
dc.keywordsDeformation
dc.keywordsCreep
dc.keywordsTemperature
dc.keywordsBuckling
dc.keywordsExternal pressure
dc.keywordsCollapse
dc.keywordsFinite element methods
dc.keywordsFracture (Materials)
dc.keywordsFinite element model
dc.keywordsThickness
dc.keywordsWall thickness
dc.keywordsLeakage
dc.keywordsPressure
dc.keywordsApproximation AND Heat transfer
dc.treeJournal of Pressure Vessel Technology:;1996:;volume( 118 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record