Show simple item record

dc.contributor.authorM. Perl
dc.contributor.authorC. Levy
dc.contributor.authorJ. Pierola
dc.date.accessioned2017-05-08T23:51:22Z
dc.date.available2017-05-08T23:51:22Z
dc.date.copyrightAugust, 1996
dc.date.issued1996
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28369#357_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/117546
dc.description.abstractUnder certain conditions, numerous internal surface cracks develop in pressurized thick-walled cylinders, both in the radial and longitudinal directions. For fatigue life assessment of such vessels, the 3-D interaction effects among these cracks on the prevailing stress intensity factors (SIFs) need evaluation. In Part I of this paper, radial crack arrays are considered exclusively. The mode I SIF distribution for a wide range of semi-circular and semi-elliptical cracks are evaluated. The 3-D analysis is performed via the finite element method with the submodeling technique, employing singular elements along the crack front. SIFs are evaluated for arrays of up to n = 180 cracks; for a wide range of crack depth to wall thickness ratios, a/t , from 0.05 to 0.6; and, for various ellipticities of the crack, i.e., the ratio of crack depth to semicrack length, a/c , from 0.2 to 2. Using a least-squares fit, two simple expressions for the most critical (n = 2) SIFs are obtained for sparse and dense crack arrays. The formulas, which are functions of a/t and a/c , are of very good engineering accuracy. The results clearly indicate that the SIFs are considerably affected by the interaction among the cracks in the array as well as the three-dimensionality of the problem. In Part II of this paper, the interaction effects between longitudinal coplanar cracks will be analyzed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThree-Dimensional Interaction Effects in an Internally Multicracked Pressurized Thick-Walled Cylinder— Part I: Radial Crack Arrays
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842200
dc.journal.fristpage357
dc.journal.lastpage363
dc.identifier.eissn1528-8978
dc.keywordsFracture (Materials)
dc.keywordsCylinders
dc.keywordsFatigue life
dc.keywordsFormulas
dc.keywordsFunctions
dc.keywordsSurface cracks
dc.keywordsVessels
dc.keywordsWall thickness
dc.keywordsStress AND Finite element methods
dc.treeJournal of Pressure Vessel Technology:;1996:;volume( 118 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record