Show simple item record

dc.contributor.authorK. Nakacho
dc.contributor.authorY. Ueda
dc.date.accessioned2017-05-08T23:51:22Z
dc.date.available2017-05-08T23:51:22Z
dc.date.copyrightAugust, 1996
dc.date.issued1996
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28369#343_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/117543
dc.description.abstractStress-relief annealing (SR treatment) is often applied to relieve welding residual stresses in the fabrication process of pressure vessels, etc. This study aims at development of an efficient method as simple as hand calculation to estimate reduction of residual stresses of very thick welded joint by SR treatment. In this first report, an estimating method is developed for relaxation tests, in uniaxial stress state, at changing and constant temperatures because the stress relaxation phenomenon is very similar to that observed in the SR treatment of a joint. Using the various relations between stress and strains in the relaxation tests, estimating equations are formulated in order to simply calculate the change of the stress. The results obtained by applying the equations are compared with the highly accurate analytical result based on the finite element method. Both results show such a good coincidence that the appropriateness of the adopted method is confirmed. In the next report, this method is extended to SR treatment of a very thick welded joint, of which the stress state and boundary condition are very complex.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Simple Estimating Method for Reduction of Welding Residual Stresses in Thick Welded Joint From Stress-Relief Annealing—Part I: Development of the Analytical Method for Relaxation Tests and Its Applicability
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842198
dc.journal.fristpage343
dc.journal.lastpage350
dc.identifier.eissn1528-8978
dc.keywordsWelding
dc.keywordsAnnealing
dc.keywordsResidual stresses
dc.keywordsRelaxation (Physics)
dc.keywordsStress
dc.keywordsWelded joints
dc.keywordsEquations
dc.keywordsTemperature
dc.keywordsBoundary-value problems
dc.keywordsFinite element methods
dc.keywordsManufacturing AND Pressure vessels
dc.treeJournal of Pressure Vessel Technology:;1996:;volume( 118 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record