Show simple item record

dc.contributor.authorM. D. Ratiu
dc.contributor.authorN. T. Moisidis
dc.date.accessioned2017-05-08T23:51:20Z
dc.date.available2017-05-08T23:51:20Z
dc.date.copyrightNovember, 1996
dc.date.issued1996
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28370#496_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/117528
dc.description.abstractCarbon steel piping (e.g., ASME SA-106, SA-53), is installed in many industrial applications (i.e., diesel generator exhaust manifold) where the internal gas flow subjects the piping to successive short time exposures at elevated temperatures up to 1100°F. A typical design of this piping without consideration for creep-fatigue cumulative damage is at least incomplete if not inappropriate. Also, a design for creep-fatigue, usually employed for long-term exposure to elevated temperatures, would be too conservative and will impose replacement of the carbon steel piping with heat-resistant CrMo steel piping. The existing ASME Standard procedures do not explicitly provide acceptance criteria for the design qualification to withstand these intermittent exposures to elevated temperatures. The serviceability qualification proposed is based on the evaluation of equivalent full temperature cycles which are presumed/expected to be experienced by the exhaust piping during the design operating life of the diesel engine. The proposed serviceability analysis consists of: (a ) determination of the permissible stress at elevated temperatures, and (b ) estimation of creep-fatigue damage for the total expected cycles of elevated temperature exposures following the procedure provided in ASME Code Cases N-253-6 and N-47-28.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Serviceability Approach for Carbon Steel Piping to Intermittent High Temperatures
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842220
dc.journal.fristpage496
dc.journal.lastpage501
dc.identifier.eissn1528-8978
dc.keywordsCarbon steel
dc.keywordsMaintainability
dc.keywordsPipes
dc.keywordsHigh temperature
dc.keywordsTemperature
dc.keywordsDesign
dc.keywordsCreep
dc.keywordsFatigue
dc.keywordsCycles
dc.keywordsExhaust systems
dc.keywordsASME Standards
dc.keywordsDiesel generators
dc.keywordsManifolds
dc.keywordsDiesel engines
dc.keywordsAcceptance criteria
dc.keywordsHeat
dc.keywordsSteel
dc.keywordsService life (Equipment)
dc.keywordsStress AND Gas flow
dc.treeJournal of Pressure Vessel Technology:;1996:;volume( 118 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record