Show simple item record

dc.contributor.authorE. Esmailzadeh
dc.contributor.authorM. Chorashi
dc.contributor.authorA. R. Ohadi
dc.date.accessioned2017-05-08T23:51:19Z
dc.date.available2017-05-08T23:51:19Z
dc.date.copyrightNovember, 1996
dc.date.issued1996
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28370#393_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/117510
dc.description.abstractDynamic properties of joints must be considered when designing complex structures. A good deal of investigation has been carried out for a better understanding of the dynamic behavior of mechanical joints. It is suitable initially to identify the parameters of a mechanical joint by using either experimental modal analysis or accurate finite element model, and then predicating the behavior of closure bolting system by means of spring-mass-damper model. The effect of bolt prestress on the maximum bolt displacement and stress has been treated. The loading is assumed to be initially peaked, exponentially decaying internal pressure pulse acting on the closure. The dependence of peak bolt stresses and deflections on the bolt prestress level and system damping is investigated. It has been shown that the derived formulas, if damping is neglected, reduce to those reported in the literature. Furthermore, the damping effect is shown to be most important, especially for large natural frequencies, longer loading duration, and lower levels of prestress. Existence of damping, which results in the reduction of maximum bolt displacement and stress, was shown to be beneficial, especially for longer loading duration. The importance of bolt displacement reduction from the viewpoint of fatigue life, vibration loosening, and sealing, especially for lower values of prestress, has been fully emphasized.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnalysis of Preloaded Bolted Joints Under Exponentially Decaying Pressure
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842204
dc.journal.fristpage393
dc.journal.lastpage398
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsBolted joints
dc.keywordsDamping
dc.keywordsDisplacement
dc.keywordsStress
dc.keywordsFatigue life
dc.keywordsFinite element model
dc.keywordsFormulas
dc.keywordsFrequency
dc.keywordsSprings
dc.keywordsDesign
dc.keywordsVibration
dc.keywordsDeflection
dc.keywordsDampers AND Sealing (Process)
dc.treeJournal of Pressure Vessel Technology:;1996:;volume( 118 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record