Show simple item record

dc.contributor.authorNiklas Järvstråt
dc.contributor.authorStig Tjo̸tta
dc.date.accessioned2017-05-08T23:50:24Z
dc.date.available2017-05-08T23:50:24Z
dc.date.copyrightJanuary, 1996
dc.date.issued1996
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26976#114_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/117086
dc.description.abstractA material model is suggested, suitable for modelling the mechanical behaviour of aluminium sections, from directly after the extrusion and throughout the on-line quenching to room temperature. An experimental procedure is detailed, whereby all material parameters in the model can be determined by a single test. In the test, the specimen is subjected to a carefully prescribed load history in tension and compression during continuous cooling. Material parameters are determined for the AIMgSi alloy AA6060. Finally, the model is compared with conventional plasticity and viscoplasticity, and found to give much better accuracy.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Mechanical Material Model for Aluminium Extrusions During On-line Quenching
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2805923
dc.journal.fristpage114
dc.journal.lastpage119
dc.identifier.eissn1528-8889
dc.keywordsAluminum
dc.keywordsQuenching (Metalworking)
dc.keywordsModeling
dc.keywordsCompression
dc.keywordsTension
dc.keywordsViscoplasticity
dc.keywordsAlloys
dc.keywordsExtruding
dc.keywordsStress
dc.keywordsPlasticity
dc.keywordsTemperature AND Cooling
dc.treeJournal of Engineering Materials and Technology:;1996:;volume( 118 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record