Show simple item record

dc.contributor.authorKeyu Li
dc.contributor.authorWilliam N. Sharpe
dc.date.accessioned2017-05-08T23:50:24Z
dc.date.available2017-05-08T23:50:24Z
dc.date.copyrightJanuary, 1996
dc.date.issued1996
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26976#88_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/117082
dc.description.abstractViscoplastic behavior of the nickel-based superalloy, Inconel 718, at a notch root has been investigated by conducting isothermal tensile, creep and cyclic elastoplastic tests at 650°C which is the working temperature of the material in aircraft engines. A laser-based interferometric technique was extended to measure biaxial strains over a gage length of 150 μm at the notch root; the computer controlled system permits real-time measurements. A thin-film pure silicon coating and an argon atmosphere were used to prevent oxidation of the reflective indentations that serve as the strain gages. The measured strains were used to evaluate the Bodner-Partom constitutive model which was incorporated into the ABAQUS finite element code. Material constants in the model were determined from uniaxial tests on smooth specimens. The predicted strains agree reasonably well with the measured ones for all three kinds of loadings.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleViscoplastic Behavior of a Notch Root at 650°C: ISDG Measurement and Finite Element Modeling
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2805938
dc.journal.fristpage88
dc.journal.lastpage93
dc.identifier.eissn1528-8889
dc.keywordsFinite element analysis
dc.keywordsModeling
dc.keywordsComputers
dc.keywordsoxidation
dc.keywordsSilicon
dc.keywordsStrain gages
dc.keywordsAircraft engines
dc.keywordsThin films
dc.keywordsCreep
dc.keywordsTemperature
dc.keywordsNickel
dc.keywordsLasers
dc.keywordsCoating processes
dc.keywordsCoatings
dc.keywordsMeasurement
dc.keywordsGages
dc.keywordsInterferometry
dc.keywordsSuperalloys AND Constitutive equations
dc.treeJournal of Engineering Materials and Technology:;1996:;volume( 118 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record