Show simple item record

dc.contributor.authorJackie D. Rehkopf
dc.contributor.authorGreg M. McNeice
dc.contributor.authorG. Wayne Brodland
dc.date.accessioned2017-05-08T23:50:23Z
dc.date.available2017-05-08T23:50:23Z
dc.date.copyrightJanuary, 1996
dc.date.issued1996
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26976#58_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/117077
dc.description.abstractSemi-rigid polyurethane foam specimens were compressed to 25, 50, or 75 percent strain at nominal strain rates of 0.14/s, 1.4/s or 14/s for up to 100 cycles. The loads carried by the fluid and matrix phases of the foam were determined over these deformation histories using an experimental method recently developed by the authors. The fluid phase contributed significantly to the first-cycle stress of specimens compressed to 50 or 75 percent strain. During subsequent cycles, the fluid component decreased more quickly than the matrix component and became negligible by 100 cycles.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFluid and Matrix Components of Polyurethane Foam Behavior Under Cyclic Compression
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2805934
dc.journal.fristpage58
dc.journal.lastpage62
dc.identifier.eissn1528-8889
dc.keywordsFluids
dc.keywordsUrethane foam
dc.keywordsCompression
dc.keywordsCycles
dc.keywordsStress AND Deformation
dc.treeJournal of Engineering Materials and Technology:;1996:;volume( 118 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record