Show simple item record

dc.contributor.authorHassan Mahfuz
dc.contributor.authorAnwar Haque
dc.contributor.authorDaixu Yu
dc.contributor.authorShaik Jeelani
dc.date.accessioned2017-05-08T23:50:23Z
dc.date.available2017-05-08T23:50:23Z
dc.date.copyrightJanuary, 1996
dc.date.issued1996
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26976#49_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/117076
dc.description.abstractCompressive behavior and the tension-compression fatigue response of resin transfer molded IM7 PW/PR 500 composite laminate with a circular notch have been studied. Fatigue damage characteristics have been investigated through the changes in the laminate strength and stiffness by gradually incrementing the fatigue cycles at a preselected load level. Progressive damage in the surface of the laminate during fatigue has been investigated using cellulose replicas. Failure mechanisms during static and cyclic tests have been identified and presented in detail. Extensive debonding of filaments and complete fiber bundle fracture accompanied by delamination were found to be responsible for fatigue failures, while fiber buckling, partial fiber fracture and delamination were characterized as the failure modes during static tests. Weibull analysis of the static, cyclic and residual tests have been performed and described in detail. Fractured as well as untested specimens were C-scanned, and the progressive damage growth during fatigue is presented. Optical Microscopy (OM) and Scanning Electron Microscopy (SEM) for the fractured specimen were also performed and the analysis of the failure behavior is presented.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleResponse of Resin Transfer Molded (RTM) Composites Under Reversed Cyclic Loading
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2805933
dc.journal.fristpage49
dc.journal.lastpage57
dc.identifier.eissn1528-8889
dc.keywordsComposite materials
dc.keywordsResins
dc.keywordsFatigue
dc.keywordsFibers
dc.keywordsLaminates
dc.keywordsFracture (Process)
dc.keywordsDelamination
dc.keywordsFailure
dc.keywordsFatigue damage
dc.keywordsOptical microscopy
dc.keywordsStiffness
dc.keywordsTension
dc.keywordsFatigue failure
dc.keywordsScanning electron microscopy
dc.keywordsBuckling
dc.keywordsCompression
dc.keywordsCycles
dc.keywordsStress AND Failure mechanisms
dc.treeJournal of Engineering Materials and Technology:;1996:;volume( 118 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record