Show simple item record

dc.contributor.authorA. F. Skipor
dc.contributor.authorS. V. Harren
dc.contributor.authorJ. Botsis
dc.date.accessioned2017-05-08T23:50:22Z
dc.date.available2017-05-08T23:50:22Z
dc.date.copyrightJanuary, 1996
dc.date.issued1996
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26976#1_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/117070
dc.description.abstractThe constitutive response of 63/37 Sn/Pb eutectic solder is studied under uniaxial tension. Stress-strain tests were performed under a wide range of applied strain rate, and creep tests were performed at several levels of applied load. Temperature dependence was ascertained by running the stress-strain and creep tests at various temperatures. With the goal of providing a constitutive description of the eutectic suitable for use in electronics packaging engineering finite element analyses, the material parameters of the phenomenological viscoplasticity model of Bodner and Partom were fit to these experiments as functions of temperature. The experiments described herein also yield important information concerning how many microstructural units must be present in a sample in order for repeatable, isotropic response to be obtained.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOn the Constitutive Response of 63/37 Sn/Pb Eutectic Solder
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2805929
dc.journal.fristpage1
dc.journal.lastpage11
dc.identifier.eissn1528-8889
dc.keywordsSolders
dc.keywordsTemperature
dc.keywordsStress
dc.keywordsCreep
dc.keywordsElectronic packaging
dc.keywordsFinite element analysis
dc.keywordsFunctions
dc.keywordsTension AND Viscoplasticity
dc.treeJournal of Engineering Materials and Technology:;1996:;volume( 118 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record