Show simple item record

dc.contributor.authorA. Valiente
dc.contributor.authorJ. Toribio
dc.contributor.authorR. Cortés
dc.contributor.authorL. Caballero
dc.date.accessioned2017-05-08T23:50:21Z
dc.date.available2017-05-08T23:50:21Z
dc.date.copyrightApril, 1996
dc.date.issued1996
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26978#186_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/117055
dc.description.abstractThe influence of hydrogen embrittlement on the tensile failure of 316L stainless-steel notched bars is phenomenologically modeled in this paper. Tensile tests of notched samples suffering hydrogen embrittlement show that hydrogen damage consists in multicracking in the area surrounding the notch, but the macromechanical behavior of the specimens remains ductile. This suggests two different ways for modeling the damage in order to explain its effect on the tensile failure load. The Notch Extension Model (NEM) considers that damage intensity around the notch is high enough to cancel out the mechanical resistance of this multicracked zone, so it assumes that the hydrogen effect is equivalent to a geometric enlargement of the notch. In the Notch Cracking Model (NCM), it is assumed that high intensity damage is concentrated at the notch root and causes this area to behave as a macroscopic crack that extends the original notch. Experimental values from tests and calculated values from models indicate that the notch extension model describes well the influence of hydrogen on the tensile notch behavior of 316 L stainless steel.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTensile Failure of Stainless-Steel Notched Bars Under Hydrogen Charging
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2804885
dc.journal.fristpage186
dc.journal.lastpage191
dc.identifier.eissn1528-8889
dc.keywordsFailure
dc.keywordsHydrogen
dc.keywordsStainless steel
dc.keywordsEmbrittlement
dc.keywordsElectrical resistance
dc.keywordsStress
dc.keywordsFracture (Materials)
dc.keywordsFracture (Process) AND Modeling
dc.treeJournal of Engineering Materials and Technology:;1996:;volume( 118 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record