Show simple item record

dc.contributor.authorM. Beghini
dc.contributor.authorG. Benamati
dc.contributor.authorL. Bertini
dc.date.accessioned2017-05-08T23:50:20Z
dc.date.available2017-05-08T23:50:20Z
dc.date.copyrightApril, 1996
dc.date.issued1996
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26978#179_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/117054
dc.description.abstractThe paper reports and discusses the results of an experimental and numerical activity, aimed to the characterization of the influence of hydrogen on the mechanical properties of a few high chromium martensitic steels which are candidates for fusion reactor and chemical applications. Experiments were conducted with the Disk Pressure Test technique, according to which a circular thin specimen is loaded up to rupture by an uniform pressure. As a detailed analysis of the stress/strain distributions in the specimen was not available, this kind of test being mainly used to obtain comparative information about different materials, a nonlinear numerical (Finite Element) model of the specimen was set up, by which stress and strain could be accurately evaluated as a function of the applied pressure. This model was employed both for interpreting experimental results and to achieve a more general understanding of the capabilities of the Disk Pressure Test for the characterization of hydrogen embrittlement effects. The calculated strain at failure showed the typical dependence on hydrogen content, falling to very low levels as a threshold concentration is exceeded.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHydrogen Embrittlement Characterization by Disk Pressure Tests: Test Analysis and Application to High Chromium Martensitic Steels
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2804884
dc.journal.fristpage179
dc.journal.lastpage185
dc.identifier.eissn1528-8889
dc.keywordsPressure
dc.keywordsDisks
dc.keywordsEmbrittlement
dc.keywordsHydrogen
dc.keywordsMartensitic steel
dc.keywordsStress
dc.keywordsMechanical properties
dc.keywordsFinite element analysis
dc.keywordsFusion reactors
dc.keywordsRupture AND Failure
dc.treeJournal of Engineering Materials and Technology:;1996:;volume( 118 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record