Show simple item record

dc.contributor.authorJ. H. Lee
dc.contributor.authorY. Zhang
dc.date.accessioned2017-05-08T23:50:20Z
dc.date.available2017-05-08T23:50:20Z
dc.date.copyrightApril, 1996
dc.date.issued1996
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26978#169_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/117053
dc.description.abstractIn Part I [1] of this paper, Gurson’s mixed hardening plasticity model with strain and stress-controlled nucleations, was used in a large deformation finite element program to study the plastic flow and damage in the uniaxial compression of cylinders under sticking friction. Due to low stress triaxiality at the bulge of the cylinders, it was found that localization may occur before void coalescence. In this paper, necessary conditions of localizations are analyzed for the axial compression of porous cylinders under sticking friction. Shear band type of localization with a normal mode of fracture has been predicted for the majority of the cases studied. Various existing localization conditions and fracture criteria are assessed using the results from the simulation. The maximum shear stress at failure is approximately constant and a constant critical damage can not be found.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Finite-Element Work-Hardening Plasticity Model of the Uniaxial Compression and Subsequent Failure of Porous Cylinders Including Effects of Void Nucleation and Growth—Part II: Localization and Fracture Criteria
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2804883
dc.journal.fristpage169
dc.journal.lastpage178
dc.identifier.eissn1528-8889
dc.keywordsPlasticity
dc.keywordsNucleation (Physics)
dc.keywordsFinite element analysis
dc.keywordsFracture (Process)
dc.keywordsCompression
dc.keywordsCylinders
dc.keywordsFailure
dc.keywordsWork hardening
dc.keywordsStress
dc.keywordsShear (Mechanics)
dc.keywordsDeformation
dc.keywordsFriction
dc.keywordsSimulation AND Hardening
dc.treeJournal of Engineering Materials and Technology:;1996:;volume( 118 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record