Show simple item record

dc.contributor.authorM. Sunseri
dc.contributor.authorJ. Cao
dc.contributor.authorA. P. Karafillis
dc.contributor.authorM. C. Boyce
dc.date.accessioned2017-05-08T23:50:20Z
dc.date.available2017-05-08T23:50:20Z
dc.date.copyrightJuly, 1996
dc.date.issued1996
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26979#426_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/117049
dc.description.abstractSpringback in a forming process is due to the elastic deformation of the part during unloading. This manufacturing defect can be accounted for through proper tooling design or through proper design and control of the magnitude and history of restraining force. Using finite element analyses of the process: (1) the effects of restraining force on the springback phenomena when stamping channels from aluminum sheet are investigated; (2) a strategy to control the binder force during the forming operation in order to reduce springback and simultaneously avoid tearing failure is described; and (3) a binder force control strategy which provides robustness in the presence of process parameter uncertainty is implemented. The process history and controller designed using finite element analyses is then experimentally verified: excellent agreement between simulation and experiments is obtained. A binder force history, which leads to a significant reduction in the amount of springback incurred by the formed part without reaching critical stretching conditions, was proposed. Although an optimal forming history was found, in order to ensure that part shape error remained minimized even in the event of variations in processing parameters such as friction, a closed-loop control algorithm was developed whereby the binder force is altered during the process in order to provide a robust, repeatable stretching history. Experiments were performed using a double-action servo-controlled process and were found to produce the desired results demonstrating both the accuracy of the numerical simulation and the success of the proposed active-binder force control method to obtain net shape.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAccommodation of Springback Error in Channel Forming Using Active Binder Force Control: Numerical Simulations and Experiments
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2806830
dc.journal.fristpage426
dc.journal.lastpage435
dc.identifier.eissn1528-8889
dc.keywordsChannels (Hydraulic engineering)
dc.keywordsBinders (Materials)
dc.keywordsComputer simulation
dc.keywordsErrors AND Force control
dc.treeJournal of Engineering Materials and Technology:;1996:;volume( 118 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record