Show simple item record

dc.contributor.authorHyo-Sok Ahn
dc.contributor.authorLanhua Wei
dc.contributor.authorSaid Jahanmir
dc.date.accessioned2017-05-08T23:50:20Z
dc.date.available2017-05-08T23:50:20Z
dc.date.copyrightJuly, 1996
dc.date.issued1996
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26979#402_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/117046
dc.description.abstractThe feasibility of an ultrasonic technique using normal-incident compressional waves and a thermal wave measurement technique was evaluated for their sensitivity to surface and subsurface damage in ceramics. Well-defined damage in the form of surface and subsurface cracks was introduced by Vickers indentation in soda-lime glass and silicon nitride. The indentation impressions were first examined by optical microscopy to identify the types of cracks and to measure the size of the indents and cracks. As expected, indentation produced median/radial cracks emanating from the indent corners and subsurface lateral cracks. The ultrasonic technique was successful in detecting the subsurface lateral cracks in both materials. The signals obtained by focusing the transducer into the material (i.e., defocusing) was used to estimate the depth of subsurface cracks. The lateral cracks and the median/radial cracks were detected by the thermal wave measurement technique using the optical beam deflection method. The lateral cracks and the median/radial cracks were identified separately by using two deflection components of the probe beam. The transverse deflection component of the probe beam was used for the detection of the median/radial cracks, whereas the normal deflection component was used for the detection of the lateral cracks. The results are discussed in terms of the applicability of these two techniques as nondestructive methods for the detection of machining-induced damage in ceramics.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNondestructive Detection of Damage Produced by a Sharp Indenter in Ceramics
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2806827
dc.journal.fristpage402
dc.journal.lastpage409
dc.identifier.eissn1528-8889
dc.keywordsCeramics
dc.treeJournal of Engineering Materials and Technology:;1996:;volume( 118 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record