Show simple item record

dc.contributor.authorH. E. Gascoigne
dc.contributor.authorM. G. Abdallah
dc.date.accessioned2017-05-08T23:50:18Z
dc.date.available2017-05-08T23:50:18Z
dc.date.copyrightJuly, 1996
dc.date.issued1996
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26979#325_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/117031
dc.description.abstractPly-level strains are determined in the cross-section of an externally pressurized cross-ply (3:1 circumferential to axial fiber ratio) graphite-epoxy ring containing an isolated circumferential wavy region. A special test fixture was used which permitted measuring orthogonal displacement components in the wavy area using moiré interferometry as the pressure was increased. Strain components were determined at selected locations in the wavy area up to approximately 90 percent of failure pressure. The study shows: (1) Large interlaminar shear strains, which are non-existent in the “perfect” ring, are present near the wave inflection points; (2) The wavy plies generate increased interlaminar normal compressive strains in both circumferential and axial plies along a radial line coinciding with maximum wave amplitude; and (3) Nonlinear strain response begins at approximately 60 percent of failure pressure.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStrain Measurement in the Wavy-Ply Region of an Externally Pressurized Cross-Ply Composite Ring
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2806813
dc.journal.fristpage325
dc.journal.lastpage329
dc.identifier.eissn1528-8889
dc.keywordsComposite materials
dc.keywordsStrain measurement
dc.keywordsPressure
dc.keywordsFailure
dc.keywordsGraphite
dc.keywordsFibers
dc.keywordsInterferometry
dc.keywordsJigs and fixtures
dc.keywordsEpoxy adhesives
dc.keywordsWaves
dc.keywordsShear (Mechanics)
dc.keywordsWave amplitude
dc.keywordsLocations AND Displacement
dc.treeJournal of Engineering Materials and Technology:;1996:;volume( 118 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record