Show simple item record

dc.contributor.authorZdeněk P. Bažant
dc.contributor.authorIsaac M. Daniel
dc.contributor.authorZhengzhi Li
dc.date.accessioned2017-05-08T23:50:18Z
dc.date.available2017-05-08T23:50:18Z
dc.date.copyrightJuly, 1996
dc.date.issued1996
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26979#317_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/117030
dc.description.abstractMeasurements of the size effect on the nominal strength of notched specimens of fiber composite laminates are reported. Tests were conducted on graphite/epoxy crossply and quasi-isotropic laminates. The specimens were rectangular strips of widths 6.4, 12.7, 25.4 and 50.8 mm (0.25, 0.50, 1.00 and 2.00 in.) geometrically similar in two dimensions. The gage lengths were 25, 51, 102 and 203 mm (1.0, 2.0, 4.0 and 8.0 in.). One set of specimens had double-edge notches and a [0/922 ]s crossply layup, and another set had a single-sided edge notch and a [0/±45/90]s , quasi-isotropic layup. It has been found that there is a significant size effect on the nominal strength. It approximately agrees with the size effect law proposed by Bažant, according to which the curve of the logarithm of the nominal strength versus the logarithm of size represents a smooth transition from a horizontal asymptote, corresponding to the strength criterion (plastic limit analysis), to an inclined asymptote of −0.5 slope, corresponding to linear elastic fracture mechanics. Optimum fits of the test results by the size effect law are obtained, and the size effect law parameters are then used to identify the material fracture characteristics, particularly the fracture energy and the effective length of the fracture process zone. Finally, the R-curves are also identified on the basis of the maximum load data. The results show that in design situations with notches or large initial traction-free cracks the size effect on the nominal strength of fiber composite laminates must be taken into account.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSize Effect and Fracture Characteristics of Composite Laminates
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2806812
dc.journal.fristpage317
dc.journal.lastpage324
dc.identifier.eissn1528-8889
dc.keywordsComposite materials
dc.keywordsLaminates
dc.keywordsFracture (Process) AND Size effect
dc.treeJournal of Engineering Materials and Technology:;1996:;volume( 118 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record