Show simple item record

dc.contributor.authorA. Haupt
dc.contributor.authorB. Schinke
dc.date.accessioned2017-05-08T23:50:17Z
dc.date.available2017-05-08T23:50:17Z
dc.date.copyrightJuly, 1996
dc.date.issued1996
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26979#281_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/117024
dc.description.abstractUniaxial tension-compression ratchetting tests were performed on AISI 316 L(N) austenitic stainless steel at room temperature. The mean stresses were low in comparison to the stress amplitudes. Nevertheless, they have been found to be of major importance to strain accumulation. Also, the stress amplitude exerts a distinct but, under the given conditions, smaller influence. No plastic shakedown has been found in the tests with constant mean stress and stress amplitude. Tests with an increase in the maximum load after a number of cycles, due to an increase in mean stress or stress amplitude, show a behavior similar to that in tests performed with the higher load only. Tests with a decrease in maximum load exhibit immediate shakedown, although tests performed with only the lower load showed ratchetting.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperiments on the Ratchetting Behavior of AISI 316L(N) Austenitic Steel at Room Temperature
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2806806
dc.journal.fristpage281
dc.journal.lastpage284
dc.identifier.eissn1528-8889
dc.keywordsTemperature AND Steel
dc.treeJournal of Engineering Materials and Technology:;1996:;volume( 118 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record