Show simple item record

dc.contributor.authorR. Kovacevic
dc.contributor.authorZ. N. Cao
dc.contributor.authorY. M. Zhang
dc.date.accessioned2017-05-08T23:50:17Z
dc.date.available2017-05-08T23:50:17Z
dc.date.copyrightOctober, 1996
dc.date.issued1996
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26981#589_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/117021
dc.description.abstractA three-dimensional numerical model is developed to describe the fluid flow and heat transfer in weld pools. Both full penetration and free deformation of the top and bottom weld pool surfaces are considered. Temperature distribution and fluid flow field are obtained. In order to analyze the influence of welding parameters on the geometrical appearance of weld pools, a normalized model is developed to characterize the geometrical appearance of weld pools. It is found that welding current can significantly affect the geometrical shape. When welding current increases, the curvature of the pool boundary at the trailing end increases. The effect of the welding speed on the geometrical appearance is slight, although its influence on the pool size is great. In the interest range of arc length (from 1 mm to 4 mm), the arc length can affect both the size and the shape of the weld pool. However, compared with the welding current and speed, its influences are much weaker. GTA welding experiments are performed to verify the validity of the numerical models. The appearance of weld pools was obtained by using machine vision and a high-shutter speed camera. It is found that the calculated results have a good agreement with the experimental ones.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleRole of Welding Parameters in Determining the Geometrical Appearance of Weld Pool
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2805961
dc.journal.fristpage589
dc.journal.lastpage596
dc.identifier.eissn1528-8889
dc.keywordsWelding
dc.keywordsComputer simulation
dc.keywordsShapes
dc.keywordsFluid dynamics
dc.keywordsDeformation
dc.keywordsHeat transfer
dc.keywordsMachinery AND Temperature distribution
dc.treeJournal of Engineering Materials and Technology:;1996:;volume( 118 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record