Show simple item record

dc.contributor.authorL. V. Smith
dc.contributor.authorS. R. Swanson
dc.date.accessioned2017-05-08T23:50:15Z
dc.date.available2017-05-08T23:50:15Z
dc.date.copyrightOctober, 1996
dc.date.issued1996
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26981#478_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/117004
dc.description.abstractBraided preforms of carbon fiber are under consideration for structural applications because of the potential for automated fabrication and possible improvement in through-the-thickness properties, although some loss of in-plane properties is expected. In the present investigation, the biaxial compressive strength properties of triaxial braided cylinders are measured experimentally, and the effects of four different sets of braid architectures are considered. The results show that fiber direction strain can correlate the results of biaxial tensile and compression failure tests. The braid parameters are found to have an effect on measured strengths, primarily through the introduction of defects into the fiber paths. The axial compression strength was found to be sensitive to waviness in the fiber path that was produced by uneven braiding coverage. Braid direction compression and tension strength is significantly lower than axial strength, and is also affected by braid parameters.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Architecture on the Strength of Braided Tubes Under Biaxial Tension and Compression
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2805945
dc.journal.fristpage478
dc.journal.lastpage484
dc.identifier.eissn1528-8889
dc.keywordsCompression
dc.keywordsTension
dc.keywordsBraid (Textile)
dc.keywordsFibers
dc.keywordsCompressive strength
dc.keywordsArchitecture
dc.keywordsThickness
dc.keywordsProduct quality
dc.keywordsManufacturing
dc.keywordsCarbon fibers
dc.keywordsCylinders
dc.keywordsFailure AND Preforms
dc.treeJournal of Engineering Materials and Technology:;1996:;volume( 118 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record