Show simple item record

dc.contributor.authorR. E. Williams
dc.contributor.authorR. M. Potter
dc.contributor.authorS. Miska
dc.date.accessioned2017-05-08T23:49:56Z
dc.date.available2017-05-08T23:49:56Z
dc.date.copyrightMarch, 1996
dc.date.issued1996
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26463#2_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/116841
dc.description.abstractThe greatest limitation of the spallation process is its inability to spall (or to consistently spall) many rocks encountered in petroleum drilling and mining operations. The New Mexico Institute of Mining and Technology has conducted a series of experiments to investigate the possibility of expanding the use of the spallation process to the penetration of rocks generally considered not to be spallable. The methods used during this work were 1) spalling at temperatures below that produced by the stoichiometric burning of fuel oil and air, and 2) spalling by alternately heating and quenching the rock surfaces. No success was experienced in spalling at the lower temperatures, but initial tests showed the alternate heating and chilling system to be successful, particularly in penetrating travertine limestone. However, continued testing indicated that, unless the rocks are extremely uniform in composition, spalling will result in highly irregular holes or holes that cannot be directionally controlled.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperiments in Thermal Spallation of Various Rocks
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue1
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2792690
dc.journal.fristpage2
dc.journal.lastpage8
dc.identifier.eissn1528-8994
dc.keywordsSpallation (Nuclear physics) AND Rocks
dc.treeJournal of Energy Resources Technology:;1996:;volume( 118 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record