Show simple item record

dc.contributor.authorN. Papanikolaou
dc.contributor.authorI. Wierzba
dc.date.accessioned2017-05-08T23:49:55Z
dc.date.available2017-05-08T23:49:55Z
dc.date.copyrightJune, 1996
dc.date.issued1996
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26466#134_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/116836
dc.description.abstractThe effects of changes in the jet nozzle geometry, i.e., nozzle shape and lip thickness, on the blowout limits of jet diffusion flames in a co-flowing air stream were experimentally investigated for a range of co-flow air stream velocities. Circular and elongated nozzles of different axes rations were employed. Preliminary results showed that nozzles with low major-to-minor axes ratios improved, while high ratios reduced, the blowout limit of attached flames compared with that for an equivalent circular nozzle. The nozzle shape had no apparent influence on the blowout limits lifted flames and the limiting stream velocity. The experimental blowout limits of lifted flames were found to be a function of the co-flowing stream velocity and jet discharge area. On the other hand, the stability of attached flames was a function of the co-flowing stream velocity, jet discharge area as well as the nozzle shape. The effect of premixing a fuel with the surrounding air was also studied. Generally, the introduction of auxiliary fuel into the surrounding stream either increased or decreased the blowout limit depending on the type of flame stabilization mechanism prior to blowout. The stability mechanism of the flame was found to be a function of the co-flow stream velocity and the auxiliary fuel employed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Burner Geometry on the Blowout Limits of Jet Diffusion Flames in a Co-Flowing Oxidizing Stream
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2792704
dc.journal.fristpage134
dc.journal.lastpage139
dc.identifier.eissn1528-8994
dc.keywordsGeometry AND Diffusion flames
dc.treeJournal of Energy Resources Technology:;1996:;volume( 118 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record