| dc.contributor.author | S. M. Correa | |
| dc.contributor.author | A. J. Dean | |
| dc.contributor.author | I. Z. Hu | |
| dc.date.accessioned | 2017-05-08T23:49:53Z | |
| dc.date.available | 2017-05-08T23:49:53Z | |
| dc.date.copyright | September, 1996 | |
| dc.date.issued | 1996 | |
| dc.identifier.issn | 0195-0738 | |
| dc.identifier.other | JERTD2-26467#193_1.pdf | |
| dc.identifier.uri | http://yetl.yabesh.ir/yetl/handle/yetl/116818 | |
| dc.description.abstract | Since recent reviews cover the issues in NOx formation under gas-turbine canditions, and since regulations essentially dictate use of the premixed mode of combustion for minimum NOx , this review concentrates on phenomena that can arise in premixed combustion. Specifically, 1) the initial unmixedness in a fuel-air premixer has been shown to make overall lean mixtures autoignite sooner than might be expected based on the overall fuel-air ratio, because the richer portions of the mixture lead the process;2) combustion pressure oscillations caused by the interplay between acoustic waves and unsteady heat release in a one-dimensional system can be calculated in good accordance with measured data, and set the stage for multi-dimensional CFD;3) carbon deposition arising from the flow of liquid fuel over metal surfaces such as found in fuel injectors and swirl cups has been described as a function of temperature and of surface composition; and 4) quenching and subsequent emissions of carbon monoxide can be minimized by preservation of a boundary-layer rather than an impingement type of flow over combustor liners. | |
| dc.publisher | The American Society of Mechanical Engineers (ASME) | |
| dc.title | Combustion Technology for Low-Emissions Gas-Turbines:Selected Phenomena Beyond NOx | |
| dc.type | Journal Paper | |
| dc.journal.volume | 118 | |
| dc.journal.issue | 3 | |
| dc.journal.title | Journal of Energy Resources Technology | |
| dc.identifier.doi | 10.1115/1.2793862 | |
| dc.journal.fristpage | 193 | |
| dc.journal.lastpage | 200 | |
| dc.identifier.eissn | 1528-8994 | |
| dc.keywords | Gas turbines | |
| dc.keywords | Nitrogen oxides | |
| dc.keywords | Emissions | |
| dc.keywords | Combustion technologies | |
| dc.keywords | Combustion | |
| dc.keywords | Fuels | |
| dc.keywords | Mixtures | |
| dc.keywords | Flow (Dynamics) | |
| dc.keywords | Carbon | |
| dc.keywords | Computational fluid dynamics | |
| dc.keywords | Heat | |
| dc.keywords | Temperature | |
| dc.keywords | Oscillations | |
| dc.keywords | Pressure | |
| dc.keywords | Regulations | |
| dc.keywords | Fuel injectors | |
| dc.keywords | Acoustics | |
| dc.keywords | Preservation | |
| dc.keywords | Waves | |
| dc.keywords | Combustion chambers | |
| dc.keywords | Quenching (Metalworking) | |
| dc.keywords | Metal surfaces AND Boundary layers | |
| dc.tree | Journal of Energy Resources Technology:;1996:;volume( 118 ):;issue: 003 | |
| dc.contenttype | Fulltext | |