Show simple item record

dc.contributor.authorJ. E. Carryer
dc.contributor.authorR. H. Roy
dc.contributor.authorJ. D. Powell
dc.date.accessioned2017-05-08T23:49:47Z
dc.date.available2017-05-08T23:49:47Z
dc.date.copyrightMarch, 1996
dc.date.issued1996
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26220#106_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/116747
dc.description.abstractThe air-fuel ratio of automotive engines during the warm-up period is difficult to control and contributes a substantial portion of the emissions on the EPA test cycle. High bandwidth estimation of the in-cylinder charge temperature provides opportunities for improvement in spark ignition (SI) engine control algorithms. Pressure sensor based algorithms for estimating air-fuel ratio (AFR) have been shown to be improved by bulk temperature information. This paper explores the suitability of using acoustic resonances to estimate charge temperature in the presence of an unknown AFR and without the ‘sharp’ excitation of diesel or knocking SI combustion. A technique that allows for the estimation of the precombustion average bulk charge temperature during a 1-2 ms interval based on acoustic resonance data gathered from a pressure transducer is described. A parameter estimation algorithm suitable for extracting the required frequency information from short data sets is identified. The variation in temperature estimates as a function of AFR has been explored using a computer simulation that accounts for the change in the ratio of specific heats with changing mixture strength. The performance of the acoustic resonance based temperature estimates has been evaluated by comparing them to predictions based on a polytropic compression.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEstimating In-Cylinder Precombustion Mixture Temperatures Using Acoustic Resonances
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue1
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2801129
dc.journal.fristpage106
dc.journal.lastpage112
dc.identifier.eissn1528-9028
dc.keywordsTemperature
dc.keywordsAcoustics
dc.keywordsCylinders
dc.keywordsMixtures
dc.keywordsAlgorithms
dc.keywordsResonance
dc.keywordsFuels
dc.keywordsCombustion
dc.keywordsComputer simulation
dc.keywordsEngines
dc.keywordsPressure transducers
dc.keywordsPressure sensors
dc.keywordsCompression
dc.keywordsCycles
dc.keywordsDiesel
dc.keywordsIgnition
dc.keywordsParameter estimation
dc.keywordsAutomotive engines
dc.keywordsEmissions AND Control algorithms
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1996:;volume( 118 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record