Show simple item record

dc.contributor.authorKok-Meng Lee
dc.contributor.authorRonald B. Roth
dc.contributor.authorZhi Zhou
dc.date.accessioned2017-05-08T23:49:46Z
dc.date.available2017-05-08T23:49:46Z
dc.date.copyrightMarch, 1996
dc.date.issued1996
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26220#29_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/116737
dc.description.abstractExamination of existing joint designs for robot wrist applications has indicated that a spherical wrist motor offers a major performance advantage in trajectory planning and control as compared to the popular three-consecutive-rotational joint wrist. The tradeoff, however, is the complexity of the dynamic modeling and control. This paper presents the dynamic modeling and the control strategy of a three degree-of-freedom (DOF) variable-reluctance (VR) spherical motor which presents some attractive possibilities by combining pitch, roll, and yaw motion in a single joint. The spherical motor dynamics consist of the rotor dynamics and a torque model. The torque model is described as a function of coil excitations and a permeance model in terms of the relative position between the rotor and the stator. Both the forward dynamics which determine the rotor motion as a result of activating the electromagnetic coils and the inverse model which determines the coil excitations required to generate the desired torque are derived in this paper. The solution to the forward dynamics of the spherical motor is unique, but the inverse model has many solutions and therefore an optimization is desired. Experimental results verifying the dynamic model are presented. The control of a VR spherical motor consists of two parts; namely, the control of the rotor dynamics with the actuating torque as system input, and the determination of the optimal electrical inputs for a specified actuating torque. The simulation results and implementation issues in determining the optimal control input vectors are addressed. It is expected that the resulting analysis will serve as a basis for dynamic modeling, motion control development, and design optimization of the VR spherical motor.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDynamic Modeling and Control of a Ball-Joint-Like Variable-Reluctance Spherical Motor
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue1
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2801148
dc.journal.fristpage29
dc.journal.lastpage40
dc.identifier.eissn1528-9028
dc.keywordsEngines
dc.keywordsDynamic modeling
dc.keywordsTorque
dc.keywordsDynamics (Mechanics)
dc.keywordsOptimization
dc.keywordsRotordynamics
dc.keywordsRotors
dc.keywordsSimulation results
dc.keywordsStators
dc.keywordsYaw
dc.keywordsDynamic models
dc.keywordsRobots
dc.keywordsMotion control
dc.keywordsTrajectories (Physics)
dc.keywordsDegrees of freedom
dc.keywordsDesign
dc.keywordsOptimal control AND Motion
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1996:;volume( 118 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record