Show simple item record

dc.contributor.authorKennon Guglielmo
dc.contributor.authorNader Sadegh
dc.date.accessioned2017-05-08T23:49:46Z
dc.date.available2017-05-08T23:49:46Z
dc.date.copyrightMarch, 1996
dc.date.issued1996
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26220#15_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/116735
dc.description.abstractThis paper presents a new repetitive learning controller for motion control of mechanical manipulators undergoing periodic tasks defined in Cartesian space. The controller does not require knowledge of the manipulator dynamic parameters beyond a simple geometric description. The desired task will be defined in Cartesian coordinates, and no inverse kinematics or inverse Jacobian will be calculated. The asymptotic stability of this algorithm is proven using the Lyapunov approach, and the nonlinear characteristics of the manipulator are explicitly taken into account. The results of implementation of this new repetitive learning controller on an IBM 7545 robotic manipulator are presented. Cartesian feedback was obtained from optical joint position encoders using forward kinematics, and velocity was estimated by simple numerical differentiation of the Cartesian position signal in software. The performance of the algorithm was compared to that of a simple PD feedback system, and a modified “Computed Torque” controller using inverse kinematics on the Cartesian path. The learning algorithm outperformed both of these controllers by a significant margin, exhibited convergence within approximately three cycles, and did not require inverse kinematics to execute the Cartesian path.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTheory and Implementation of a Repetitive Robot Controller With Cartesian Trajectory Description
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue1
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2801138
dc.journal.fristpage15
dc.journal.lastpage21
dc.identifier.eissn1528-9028
dc.keywordsControl equipment
dc.keywordsRobots
dc.keywordsTrajectories (Physics)
dc.keywordsKinematics
dc.keywordsAlgorithms
dc.keywordsManipulators
dc.keywordsFeedback
dc.keywordsManipulator dynamics
dc.keywordsSignals
dc.keywordsComputer software
dc.keywordsCycles
dc.keywordsTorque
dc.keywordsStability AND Motion control
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1996:;volume( 118 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record