Show simple item record

dc.contributor.authorJay F. Tu
dc.contributor.authorJeffrey L. Stein
dc.date.accessioned2017-05-08T23:49:40Z
dc.date.available2017-05-08T23:49:40Z
dc.date.copyrightSeptember, 1996
dc.date.issued1996
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26227#580_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/116677
dc.description.abstractA simple to apply, two-step observer design methodology is developed for a general class of systems with model uncertainty. This approach is applied to estimate bearing internal temperatures and the bearing preload of a machine tool spindle. The first step is the design of a model error compensator (MEC) to account for the model error associated with the bearing friction heat generation. The second step includes a conventional observer based on the nominal model that results from the implementation of the MEC. The sufficient condition for constructing an effective MEC loop for the target spindle system is derived. The effectiveness of the MEC loop is demonstrated experimentally by comparing several different conventional observer designs, with and without the MEC. A comparison of the measurements to the estimation results indicate in all cases tested the MEC improves the performance of the conventional observers. In addition, the results clearly show the distinctly different bearing outer ring/housing, rolling elements, and inner ring temperature behaviors. From the temperature estimation results, it is shown that previously published data on initial transient error associated with preload estimation is mainly due to the estimation error in the rolling element temperature. The proposed two-step observer methodology appears to be well suited for bearing temperature and preload monitoring problems.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleModel Error Compensation for Bearing Temperature and Preload Estimation
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2801183
dc.journal.fristpage580
dc.journal.lastpage585
dc.identifier.eissn1528-9028
dc.keywordsTemperature
dc.keywordsError compensation
dc.keywordsBearings
dc.keywordsErrors
dc.keywordsMachine tool spindles
dc.keywordsUncertainty
dc.keywordsMeasurement
dc.keywordsSpindles (Textile machinery)
dc.keywordsFriction
dc.keywordsHeat
dc.keywordsDesign AND Design methodology
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1996:;volume( 118 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record