Show simple item record

dc.contributor.authorAleksander Hać
dc.contributor.authorIljoong Youn
dc.contributor.authorHsien H. Chen
dc.date.accessioned2017-05-08T23:49:40Z
dc.date.available2017-05-08T23:49:40Z
dc.date.copyrightSeptember, 1996
dc.date.issued1996
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26227#518_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/116669
dc.description.abstractTwo methods of control of semi-active suspensions that specifically address the problem of structural vibrations of the vehicle body are considered. These control strategies are based on those developed for active suspension systems in Part I of this study and rely on either modifications of suspension control forces that account for body compliance or on the addition of a proof-mass actuator to reduce structural vibrations. A half-car model that includes body compliance is used to evaluate the effects of these control strategies on the performance of the suspensions with two-state and continuously modulated dampers. The performances of the systems are evaluated in both the time and frequency domains. The effect of time delays in the process of actuating the adjustable dampers is investigated. Significant reductions of structural vibrations are observed when the nodes of body beaming modes are a sufficient distance away from the suspension mounting points, and the time delays in the control system are negligible. The results deteriorate markedly when two-state dampers are used instead of continuously variable dampers or when a time delay in excess of 5 ms is present in the control loop. When the preference in suspension design shifts toward road holding it becomes increasingly difficult to improve the vehicle structural response without sacrificing other aspects of performance.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleControl of Suspensions for Vehicles With Flexible Bodies—Part II: Semi-Active Suspensions
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2801175
dc.journal.fristpage518
dc.journal.lastpage525
dc.identifier.eissn1528-9028
dc.keywordsVehicles
dc.keywordsDampers
dc.keywordsVibration
dc.keywordsDelays
dc.keywordsRoads
dc.keywordsForce
dc.keywordsControl systems
dc.keywordsSuspension systems
dc.keywordsActuators AND Design
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1996:;volume( 118 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record