Show simple item record

dc.contributor.authorAleksander Hać
dc.contributor.authorIljoong Youn
dc.contributor.authorHsien H. Chen
dc.date.accessioned2017-05-08T23:49:39Z
dc.date.available2017-05-08T23:49:39Z
dc.date.copyrightSeptember, 1996
dc.date.issued1996
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26227#508_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/116668
dc.description.abstractIn this paper, two classes of control strategies for active suspension are developed. The purpose of control is to reduce structural vibrations of the body without compromising traditional control objectives. In the first approach, the control laws for the suspension forces are synthesized to enhance modal damping in the structural modes. In the second approach, a separate proof-mass actuator mounted on the vehicle body is used to suppress structural vibrations, while suspension controllers based on a rigid-body model are utilized. The results of simulation demonstrate that with both methods significant reductions in structural vibrations can be achieved without sacrificing other aspects of performance, provided that modal variables for the body beaming modes are available for feedback. To simplify the implementation, suboptimal decentralized controllers using state and subsequently output feedback are developed, which are obtained by taking advantage of the separation between the natural frequencies of the rigid-body and the structural modes. For both control methods, output feedback, including the modal variables for the body beaming modes, results in performances that are close to those obtained for a full state feedback.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleControl of Suspensions for Vehicles With Flexible Bodies—Part I: Active Suspensions
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2801174
dc.journal.fristpage508
dc.journal.lastpage517
dc.identifier.eissn1528-9028
dc.keywordsVehicles
dc.keywordsVibration
dc.keywordsFeedback
dc.keywordsControl equipment
dc.keywordsActuators
dc.keywordsDamping
dc.keywordsForce
dc.keywordsSeparation (Technology)
dc.keywordsFrequency
dc.keywordsSimulation results AND State feedback
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1996:;volume( 118 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record