Show simple item record

dc.contributor.authorJia-Yush Yen
dc.contributor.authorChao-Si Jeng
dc.contributor.authorKuang-Chau Fan
dc.date.accessioned2017-05-08T23:49:39Z
dc.date.available2017-05-08T23:49:39Z
dc.date.copyrightSeptember, 1996
dc.date.issued1996
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26227#476_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/116663
dc.description.abstractThis paper addresses the servo design for a real-time, laser-tracking, three-dimensional (3-D), position measurement system. The 3-D measurement system uses two sets of tracking mirrors to shine laser beams toward the measurement point. By examining the angles of these mirrors, one can calculate the position of this point. The servo loop in the measurement system corrects the mirror orientations by continuously checking and compensating the offset between the out going laser beam and the beam reflected from a retro-reflector attached to the measurement point. To achieve high speed and high accuracy measurement, the tracking servo system has to compensate for the highly nonlinear nature of the system and maintain the laser beams close to the measurement point. This paper derives the relationship between the tracking angle rotations and the measured beam offsets. By including this relationship in the system model, the linear H∞ optimization technique can be applied for controller synthesis. All the design specifications are then directly implemented.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleServo Design for a 3-D Laser-Tracking Measurement System
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2801170
dc.journal.fristpage476
dc.journal.lastpage481
dc.identifier.eissn1528-9028
dc.keywordsLasers
dc.keywordsServomechanisms
dc.keywordsDesign
dc.keywordsMeasurement systems
dc.keywordsMirrors
dc.keywordsLaser beams
dc.keywordsControl equipment AND Optimization
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1996:;volume( 118 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record