Show simple item record

dc.contributor.authorJongkil Lee
dc.contributor.authorW. K. Van Moorhem
dc.date.accessioned2017-05-08T23:49:39Z
dc.date.available2017-05-08T23:49:39Z
dc.date.copyrightSeptember, 1996
dc.date.issued1996
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26227#468_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/116662
dc.description.abstractA theoretical and experimental approach was used to investigate the motion and effectiveness of a Self-Compensating Dynamic Balancer (SCDB). This is a device intended to minimize the effects of rotor imbalance and vibratory forces on a rotating system during normal operation. The basic concept of an automatic dynamic balancer has been described in many U.S. patents. The SCDB is composed of a circular disk with a groove containing massive balls and a low viscosity damping fluid. The objective of this research is to determine the motion of the balls and how this ball motion is related to the vibration of the rotating system using both theoretical and experimental methods. The equations of motion the balls were derived by the Lagrangian method. Static and dynamic solutions were derived from the analytic model. To consider dynamic stability of the motion, perturbation equations were investigated by two different methods: Floquet theory and direct computer simulation. On the basis of the results of the stability investigation, ball positions which result in a balance system are stable above the critical speed and unstable at critical speed and below critical speed. To determine the actual critical speed of the rotating system used in the experimental work, a modal analysis was conducted. Experimental results confirm the predicted ball positions. Based on the theoretical and experimental results, when the system operates below and near the first critical speed, the balls do not balance the system. However, when the system operates above the first critical speed the balls can balance the system.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnalytical and Experimental Analysis of a Self-Compensating Dynamic Balancer in a Rotating Mechanism
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2801169
dc.journal.fristpage468
dc.journal.lastpage475
dc.identifier.eissn1528-9028
dc.keywordsForce
dc.keywordsStability
dc.keywordsFluids
dc.keywordsMotion
dc.keywordsViscosity
dc.keywordsComputer simulation
dc.keywordsEquations of motion
dc.keywordsDamping
dc.keywordsExperimental methods
dc.keywordsRotors
dc.keywordsVibration
dc.keywordsDisks
dc.keywordsDynamic stability
dc.keywordsEquations
dc.keywordsExperimental analysis
dc.keywordsPatents AND Mechanisms
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1996:;volume( 118 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record