Show simple item record

dc.contributor.authorN. Sepehri
dc.contributor.authorF. Sassani
dc.contributor.authorP. D. Lawrence
dc.contributor.authorA. Ghasempoor
dc.date.accessioned2017-05-08T23:49:39Z
dc.date.available2017-05-08T23:49:39Z
dc.date.copyrightSeptember, 1996
dc.date.issued1996
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26227#463_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/116661
dc.description.abstractInherent to any heavy-duty hydraulic machine operation with a large number of interconnected components are nonidealities such as gear backlash, friction and leakage. The swing motion of the operator’s cabin in an excavator is a typical example. In this paper we conduct a study comprising experimental, mathematical and simulation components to determine the degree to which these nonlinearities affect the performance of such machines. The inclusion of the conventional model of backlash in the simulation of the excavator swing motion is shown to be inefficient and unnecessary in terms of computation time and the final results. A new model which combines the fluid-flow and the gear train dynamics is developed. The study of contact and non-contact cases brings about proper sets of static and dynamic equations which efficiently simulate this phenomenon for the class of excavator machines under consideration. The inclusion of stick-slip friction model in the simulation shows two effects. Firstly, it causes a noticeable time-delay at the beginning of the swing motion. Secondly, it results in an overshoot during velocity control experiments. It is also shown that dry friction and leakage (cross-port or external) are as significant as gear backlash in determining the pressure patterns in the connecting hydraulic lines and, therefore, should not be overlooked, especially when the excavator cabin is brought to a stop. Often, this is the most important state event when accurate positioning is crucial. The simulation results are qualitatively supported by the experimental evidence. The experiments were performed on an instrumented teleoperated Caterpillar 215B excavator.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSimulation and Experimental Studies of Gear Backlash and Stick-Slip Friction in Hydraulic Excavator Swing Motion
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2801168
dc.journal.fristpage463
dc.journal.lastpage467
dc.identifier.eissn1528-9028
dc.keywordsFriction
dc.keywordsMotion
dc.keywordsSimulation
dc.keywordsGears
dc.keywordsStick-slip
dc.keywordsLeakage
dc.keywordsMachinery
dc.keywordsDynamics (Mechanics)
dc.keywordsPressure
dc.keywordsFluid dynamics
dc.keywordsEquations of motion
dc.keywordsHydraulic equipment
dc.keywordsTrains
dc.keywordsDry-friction whip and whirl
dc.keywordsComputation
dc.keywordsDelays AND Simulation results
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1996:;volume( 118 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record