Show simple item record

dc.contributor.authorM. J. Panza
dc.contributor.authorR. W. Mayne
dc.date.accessioned2017-05-08T23:49:38Z
dc.date.available2017-05-08T23:49:38Z
dc.date.copyrightSeptember, 1996
dc.date.issued1996
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26227#449_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/116659
dc.description.abstractThe end point position and vibration control of a rotating flexible beam mechanism driven by a hydraulic cylinder actuator are considered. An integrated nonlinear system model comprised of beam dynamics, hydraulic actuator, control valves, and control scheme is presented. Control based on simple position feedback, along with a hydraulic actuation system tuned to suppress beam vibration over a wide range of angular motion, is investigated. For positioning to small to moderate mechanism angles, a linear system model with the actuator tuned for good open-loop performance is developed. Actuator tuning is accomplished by varying the system hydraulic resistance according to a dimensionless parameter defining the interaction between actuator dynamics and the fundamental mode of the flexible beam. Simulation results for a closed-loop system indicate that this simple tuned control provides comparable performance and requires less control effort than an untuned system with a more complex state feedback optimal controller. To compensate for geometric nonlinearities that cause instability when positioning to large mechanism angles, an active actuator tuning scheme based on continuous variation of hydraulic resistance is proposed. The active variable resistance controller is combined with simple position feedback and designed to provide a constant dimensionless actuator-flexible beam interaction parameter throughout the motion. Simulation results are presented to show the stabilizing effect of this control strategy.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHydraulic Actuator Tuning in the Control of a Rotating Flexible Beam Mechanism
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2801166
dc.journal.fristpage449
dc.journal.lastpage456
dc.identifier.eissn1528-9028
dc.keywordsActuators
dc.keywordsMechanisms
dc.keywordsElectrical resistance
dc.keywordsDynamics (Mechanics)
dc.keywordsControl equipment
dc.keywordsMotion
dc.keywordsFeedback
dc.keywordsSimulation results
dc.keywordsState feedback
dc.keywordsLinear systems
dc.keywordsHydraulic cylinders
dc.keywordsVibration control
dc.keywordsNonlinear systems
dc.keywordsValves
dc.keywordsVibration AND Closed loop systems
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1996:;volume( 118 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record