Show simple item record

dc.contributor.authorI. Sharf
dc.date.accessioned2017-05-08T23:49:33Z
dc.date.available2017-05-08T23:49:33Z
dc.date.copyrightDecember, 1996
dc.date.issued1996
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26230#704_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/116628
dc.description.abstractThis paper deals with manipulator systems comprising a long-reach manipulator (LRM) with a short-reach dextrous manipulator (SRM) attached to its end. The former, due to its size, is assumed to have significant structural flexibility, while the latter is modeled as a rigid robot. The particular problem addressed is that of active damping, or vibration suppression, of the LRM by using SRM specifically for that purpose Such a scenario is envisioned for operations where the large manipulator is used to deploy the small robot and it is necessary to damp out vibrations in LRM prior to operating SRM. The proposed solution to the problem uses the reaction force from SRM to LRM as a control variable which allows to effectively decouple the controller design problems for the two manipulators. A two-stage controller is presented that involves first, determining the trajectory of the short manipulator required to achieve a desired damping wrench to the supporting flexible arm and subsequently, brings the small manipulator to rest. Performance of the active damping algorithm developed is illustrated with a six-degree-of-freedom rigid manipulator on a flexible mast. Comparison to an independent derivative joint controller is included. The paper also discusses how the proposed methodology can be extended to address other issues related to operation of long-reach manipulator systems.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleActive Damping of a Large Flexible Manipulator With a Short-Reach Robot
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue4
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2802346
dc.journal.fristpage704
dc.journal.lastpage713
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1996:;volume( 118 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record