Show simple item record

dc.contributor.authorD. M. Alter
dc.contributor.authorTsu-Chin Tsao
dc.date.accessioned2017-05-08T23:49:32Z
dc.date.available2017-05-08T23:49:32Z
dc.date.copyrightDecember, 1996
dc.date.issued1996
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26230#649_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/116620
dc.description.abstractDirect drive linear motors have good potential for use as next generation machine tool feed drives since they can increase machining rates and improve servo accuracy by eliminating gear related mechanical problems. To exploit the high speed and high response direct drives for machining, the servo control must achieve as high as possible tracking performance while at the same time establishing as much as possible the dynamic stiffness in order to maintain machining stability and reduce the effect of machining disturbance forces on the tool position. This paper investigates the use of optimal H∞ control to design for large stiffness and closed-loop tracking performance. Position feedback alone is first considered, with cutting force feedback later added to augment closed loop stiffness. Optimal position feedback is experimentally seen to achieve up to a 46 percent stiffness improvement over that achievable with proportional-derivative control. The addition of force feedback to the servo-loop resulted in a further 70 to 100 percent stiffness improvement over the position feedback alone values.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleControl of Linear Motors for Machine Tool Feed Drives: Design and Implementation of H∞ Optimal Feedback Control
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue4
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2802339
dc.journal.fristpage649
dc.journal.lastpage656
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1996:;volume( 118 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record