Show simple item record

dc.contributor.authorA. Bouzid
dc.contributor.authorA. Chaaban
dc.contributor.authorA. Bazergui
dc.date.accessioned2017-05-08T23:48:11Z
dc.date.available2017-05-08T23:48:11Z
dc.date.copyrightFebruary, 1995
dc.date.issued1995
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28358#71_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/115884
dc.description.abstractThe loss of tightness of bolted flanged joints is primarily due to the relaxation of the joint; in particular, the clamping load is affected by the amount of relaxation that a gasket exhibits over time. Test methods are available for evaluating the ability of a gasket to maintain a given compressive stress. It is necessary, however, to evaluate the response of the joint members to a small change in gasket thickness produced by the effect of creep-relaxation. This paper presents an analytical evaluation of the effect of gasket creep-relaxation on the remaining gasket stress taking into account the flexibility of all joint members, thus allowing the evaluation of the required tightening load on the gasket. The results obtained by this approach are shown to agree with those determined finite on an experimental rig made up of 4-in. class-600-lb pair of flanges. Axisymmetric finite element models of larger flange assemblies are also used for comparison. The results show that creep-relaxation of gaskets has a major influence on the remaining compression load on the gasket.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Effect of Gasket Creep-Relaxation on the Leakage Tightness of Bolted Flanged Joints
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842093
dc.journal.fristpage71
dc.journal.lastpage78
dc.identifier.eissn1528-8978
dc.keywordsGaskets
dc.keywordsAeroelasticity
dc.keywordsLeakage
dc.keywordsStress
dc.keywordsFlanges
dc.keywordsRelaxation (Physics)
dc.keywordsPlasticity
dc.keywordsCompression
dc.keywordsCompressive stress
dc.keywordsFinite element model AND Thickness
dc.treeJournal of Pressure Vessel Technology:;1995:;volume( 117 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record