| dc.contributor.author | K. K. Yoon | |
| dc.contributor.author | D. E. Killian | |
| dc.date.accessioned | 2017-05-08T23:48:11Z | |
| dc.date.available | 2017-05-08T23:48:11Z | |
| dc.date.copyright | February, 1995 | |
| dc.date.issued | 1995 | |
| dc.identifier.issn | 0094-9930 | |
| dc.identifier.other | JPVTAS-28358#66_1.pdf | |
| dc.identifier.uri | http://yetl.yabesh.ir/yetl/handle/yetl/115883 | |
| dc.description.abstract | With the emergence of readily available simple J solutions for various types of structures through J estimation techniques, J -integral-based elastic-plastic fracture mechanics has become a common tool for analyzing ductile materials. This paper presents elastic-plastic solutions for semi-elliptical surface flaws of four different crack depths. Solutions are developed from a series of finite element analyses using the ABAQUS computer program with a deformation plasticity material constitutive law. Although the solutions are directly applicable to a single set of Ramberg-Osgood material parameters, they may be extended to include various amounts of strain hardening by a ratioing technique utilizing calibration functions from the EPRI handbook for continuous flaws. This paper addresses cylindrical structures loaded by internal pressure, and excludes any consideration of thermal loadings. Elasticplastic J solutions, determined for pressures up to 5000 psi (12700 Pa), or twice the design pressure, depart from plastic-zone-corrected linear elastic predictions at approximately 3000 psi (7620 Pa) pressure. The h1 plastic calibration functions derived in this paper are limited to the point of greatest crack depth in 6:1 aspect ratio semi-elliptical inside surface flaws in cylindrical pressure vessels. | |
| dc.publisher | The American Society of Mechanical Engineers (ASME) | |
| dc.title | J Estimation Method for a Semi-Elliptical Surface Flaw in a Cylinder | |
| dc.type | Journal Paper | |
| dc.journal.volume | 117 | |
| dc.journal.issue | 1 | |
| dc.journal.title | Journal of Pressure Vessel Technology | |
| dc.identifier.doi | 10.1115/1.2842092 | |
| dc.journal.fristpage | 66 | |
| dc.journal.lastpage | 70 | |
| dc.identifier.eissn | 1528-8978 | |
| dc.keywords | Pressure | |
| dc.keywords | Plasticity | |
| dc.keywords | Deformation | |
| dc.keywords | Fracture mechanics | |
| dc.keywords | Pressure vessels | |
| dc.keywords | Fracture (Materials) | |
| dc.keywords | Design | |
| dc.keywords | Finite element analysis | |
| dc.keywords | Calibration | |
| dc.keywords | Computer software | |
| dc.keywords | Cylinders | |
| dc.keywords | Functions AND Work hardening | |
| dc.tree | Journal of Pressure Vessel Technology:;1995:;volume( 117 ):;issue: 001 | |
| dc.contenttype | Fulltext | |