Show simple item record

dc.contributor.authorS. Ibarra
dc.contributor.authorR. R. Konet
dc.date.accessioned2017-05-08T23:48:11Z
dc.date.available2017-05-08T23:48:11Z
dc.date.copyrightFebruary, 1995
dc.date.issued1995
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28358#19_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/115875
dc.description.abstractRemaining life assessments were conducted on in-service catalytic reformer furnace tubes that had been operating 21 yr. These assessments were made with both API RP 530 (Appendix E) and the new Project Omega method. Small sections from the furnaces were removed and creep rupture tests conducted using the Omega methodology, and the remaining life was determined. These tests showed that the furnace tubes had negligible damage.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLife Assessment of 1 1/4 Cr-1/2 Mo Steel Catalytic Reformer Furnace Tubes Using the MPC Omega Method
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842084
dc.journal.fristpage19
dc.journal.lastpage23
dc.identifier.eissn1528-8978
dc.keywordsSteel
dc.keywordsFurnaces
dc.keywordsRupture
dc.keywordsAmerican Petroleum Institute AND Creep
dc.treeJournal of Pressure Vessel Technology:;1995:;volume( 117 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record