Show simple item record

dc.contributor.authorG. Yagawa
dc.contributor.authorN. Handa
dc.contributor.authorK. Watashi
dc.contributor.authorT. Fujioka
dc.contributor.authorH. Ueda
dc.contributor.authorM. Uno
dc.contributor.authorK. Hojo
dc.contributor.authorS. Ueda
dc.contributor.authorT. Uno
dc.contributor.authorS. Yoshimura
dc.date.accessioned2017-05-08T23:48:11Z
dc.date.available2017-05-08T23:48:11Z
dc.date.copyrightFebruary, 1995
dc.date.issued1995
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28358#7_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/115873
dc.description.abstractThis paper is concerned with round-robin analyses of probabilistic fracture mechanics (PFM) problems of aged RPV material. Analyzed here is a plate with a semi-elliptical surface crack subjected to various cyclic tensile and bending stresses. A depth and an aspect ratio of the surface crack are assumed to be probabilistic variables. Failure probabilities are calculated using the Monte Carlo methods with the importance sampling or the stratified sampling techniques. Material properties are chosen from the Marshall report, the ASME Code Section XI, and the experiments on a Japanese RPV material carried out by the Life Evaluation (LE) subcommittee of the Japan Welding Engineering Society (JWES), while loads are determined referring to design loading conditions of pressurized water reactors (PWR). Seven organizations participate in this study. At first, the procedures for obtaining reliable PFM solutions with low failure probabilities are examined by solving a unique problem with seven computer programs. The seven solutions agree very well with one another, i.e., by a factor of 2 to 5 in failure probabilities. Next, sensitivity analyses are performed by varying fracture toughness values, loading conditions, and pre and in-service inspections. Finally, life extension simulations based on the PFM analyses are performed. It is clearly demonstrated from these analyses that failure probabilities are so sensitive to the change of fracture toughness values that the degree of neutron irradiation significantly influences the judgment of plant life extension.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStudy on Life Extension of Aged RPV Material Based on Probabilistic Fracture Mechanics: Japanese Round Robin
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842095
dc.journal.fristpage7
dc.journal.lastpage13
dc.identifier.eissn1528-8978
dc.keywordsFracture mechanics
dc.keywordsLife extension
dc.keywordsProbability
dc.keywordsFailure
dc.keywordsFracture toughness
dc.keywordsSampling (Acoustical engineering)
dc.keywordsSurface cracks
dc.keywordsPressurized water reactors
dc.keywordsASME Standards
dc.keywordsIn-service inspection
dc.keywordsMaterials properties
dc.keywordsBending (Stress)
dc.keywordsDesign
dc.keywordsEngineering simulation
dc.keywordsNeutrons
dc.keywordsWelding
dc.keywordsIrradiation (Radiation exposure)
dc.keywordsStress
dc.keywordsIndustrial plants
dc.keywordsMonte Carlo methods
dc.keywordsSensitivity analysis AND Computer software
dc.treeJournal of Pressure Vessel Technology:;1995:;volume( 117 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record