Show simple item record

dc.contributor.authorN. T. Moisidis
dc.contributor.authorM. D. Ratiu
dc.date.accessioned2017-05-08T23:48:09Z
dc.date.available2017-05-08T23:48:09Z
dc.date.copyrightAugust, 1995
dc.date.issued1995
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28361#279_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/115854
dc.description.abstractOperating conditions specific to pressurizer safety valves (PSVs) have led to numerous problems and have caused industry and NRC concerns regarding the adequacy of spring-loaded self-actuated safety valves for reactor coolant system (RCS) overpressure protection. Specific concerns are: setpoint drift, spurious actuations, and leakage. Based on testing and valve construction analysis of a Crosby model 6M6 PSV (Moisidis and Ratiu, 1992), it was established that the primary contributor to the valve problems is a susceptibility to weak seating. To eliminate spring instability, a new spring washer was designed, which guides the spring and precludes its rotation from the “reference” installed position (Figs. 6 and 7). Results of tests performed on a prototype PSV equipped with the modified upper spring washer has shown significant improvements in valve operability and a consistent setpoint reproducibility to less than ±1 percent of the PSV setpoint (testing of baseline, unmodified valve, resulted in a setpoint drift of ±2 percent). Enhanced valve operability will result in a significant decrease in operating and maintenance costs associated with valve maintenance and testing. In addition, the enhanced setpoint reproducibility will allow the development of a nitrogen to steam correlation for future in-house PSV testing which will result in further reductions in costs associated with valve testing.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEnhancement of Pressurizer Safety Valve Operability by Seating Design Improvement
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842124
dc.journal.fristpage279
dc.journal.lastpage282
dc.identifier.eissn1528-8978
dc.keywordsSafety
dc.keywordsValves
dc.keywordsDesign
dc.keywordsTesting
dc.keywordsSprings
dc.keywordsPlatform supply vessels
dc.keywordsMaintenance
dc.keywordsRotation
dc.keywordsConstruction
dc.keywordsEngineering prototypes
dc.keywordsNuclear reactor coolants
dc.keywordsNitrogen
dc.keywordsOverpressure protection
dc.keywordsLeakage AND Steam
dc.treeJournal of Pressure Vessel Technology:;1995:;volume( 117 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record