Show simple item record

dc.contributor.authorJ. H. Underwood
dc.contributor.authorA. P. Parker
dc.date.accessioned2017-05-08T23:48:09Z
dc.date.available2017-05-08T23:48:09Z
dc.date.copyrightAugust, 1995
dc.date.issued1995
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28361#222_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/115844
dc.description.abstractA fracture mechanics-based fatigue life analysis was developed for overstrained, pressurized thick-wall cylinders with one or several semi-elliptical-shaped axial grooves at the inner diameter. The fatigue life for a crack initiating at the root of the groove was calculated for various cylinder, groove, and crack configurations and for different material yielding conditions. Comparisons were made with fatigue crack growth and laboratory life results from A723 thick-wall cylinders, in which cannon firing tests were first performed to produce axial erosion grooves, followed by cyclic hydraulic pressurization to failure in the laboratory. The life analysis, with an initial crack size based on the expected preexisting defects, gave a good description of the crack growth and fatigue life of the tests for cylinders with and without grooves. General fatigue life calculations summarized important material and configurational effects on the fatigue life design of overstrained cylinders, including effects of material yield strength, cylinder diameter ratio, stress concentration factor, and initial crack size.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFatigue Life Analyses and Tests for Thick-Wall Cylinders Including Effects of Overstrain and Axial Grooves
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842115
dc.journal.fristpage222
dc.journal.lastpage226
dc.identifier.eissn1528-8978
dc.keywordsFatigue life
dc.keywordsCylinders
dc.keywordsFailure
dc.keywordsFatigue cracks
dc.keywordsFiring (materials)
dc.keywordsYield strength
dc.keywordsArtillery
dc.keywordsProduct quality
dc.keywordsStress concentration
dc.keywordsDesign
dc.keywordsErosion AND Fracture (Process)
dc.treeJournal of Pressure Vessel Technology:;1995:;volume( 117 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record