Show simple item record

dc.contributor.authorT. Sawa
dc.contributor.authorM. Yoneno
dc.contributor.authorR. Sasaki
dc.date.accessioned2017-05-08T23:48:07Z
dc.date.available2017-05-08T23:48:07Z
dc.date.copyrightNovember, 1995
dc.date.issued1995
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28363#298_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/115820
dc.description.abstractThis paper deals with the strength and the sealing performance of pipe flange connections combining the bonding force of adhesives with the clamping force of bolts. The epoxy adhesives or anaerobic sealants are bonded at the interface partially instead of gaskets in pipe flange connections. The stress distribution in the epoxy adhesives (anaerobic sealant), which governs the sealing performance, and the variations in axial bolt force are analyzed, using an axisymmetrical theory of elasticity, when an internal pressure is applied to a connection in which two pipe flanges are clamped together by bolts and nuts with an initial clamping force after being joined by epoxy adhesives or anaerobic sealant. In addition, a method for estimating the strength of the combination connection is demonstrated. Experiments are performed and the analytical results are consistent with the experimental results concerning the variation in axial bolt force and the strength of combination connections. It can be seen that the strength of connections increases with a decrease in the bolt pitch circle diameter. Furthermore, it is seen that the sealing performance of such combination connections in which the interface is bonded partially is improved over that of pipe flange connections with metallic gaskets.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Analysis of Pipe Flange Connections Using Epoxy Adhesives/Anaerobic Sealant Instead of Gaskets
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842127
dc.journal.fristpage298
dc.journal.lastpage304
dc.identifier.eissn1528-8978
dc.keywordsGaskets
dc.keywordsEpoxy adhesives
dc.keywordsSealants
dc.keywordsPipes
dc.keywordsFlange connections
dc.keywordsForce
dc.keywordsSealing (Process)
dc.keywordsPressure
dc.keywordsElasticity
dc.keywordsAdhesives
dc.keywordsBonding
dc.keywordsStress concentration AND Flanges
dc.treeJournal of Pressure Vessel Technology:;1995:;volume( 117 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record