Show simple item record

dc.contributor.authorJ. H. Lee
dc.contributor.authorJ. H. Vogel
dc.date.accessioned2017-05-08T23:47:24Z
dc.date.available2017-05-08T23:47:24Z
dc.date.copyrightJanuary, 1995
dc.date.issued1995
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26969#127_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/115438
dc.description.abstractAn experimental and analytical investigation was undertaken to improve understanding of the form of long fiber reinforced thermoplastic sheets. The materials tested contained 30 percent by weight of glass fibers in a polypropylene matrix, with the fibers approximately randomly oriented in the plane of sheet. The forming tests covered a range of forming temperatures between the glass transition temperature and the melting point of the polypropylene matrix. The testing geometry was that of a Swift flat-bottomed cup test, which primarily tests bending and drawing behavior of the sheet. An analysis of the process was developed in terms of a continuum model of material behavior with normal anisotropy and rotational symmetry. Results of the forming tests are compared with analytical predictions. Limitations of both the form of the material and the modeling approach are discussed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Investigation of the Formability of Long Fiber Thermoplastic Composite Sheets
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2804363
dc.journal.fristpage127
dc.journal.lastpage132
dc.identifier.eissn1528-8889
dc.keywordsFibers
dc.keywordsThermoplastic composites
dc.keywordsTemperature
dc.keywordsWeight (Mass)
dc.keywordsGlass fibers
dc.keywordsAnisotropy
dc.keywordsModeling
dc.keywordsTesting
dc.keywordsGeometry
dc.keywordsGlass transition AND Melting point
dc.treeJournal of Engineering Materials and Technology:;1995:;volume( 117 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record