Show simple item record

dc.contributor.authorK. A. Hart
dc.contributor.authorS. Mall
dc.date.accessioned2017-05-08T23:47:24Z
dc.date.available2017-05-08T23:47:24Z
dc.date.copyrightJanuary, 1995
dc.date.issued1995
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26969#109_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/115436
dc.description.abstractThe response of a quasi-isotropic laminate of metal matrix composite, SCS-6/Ti-15-3 in a thermomechanical fatigue (TMF) environment was investigated. To achieve this, three sets of fatigue tests were conducted: 1) in-phase TMF (IP-TMF), 2) out-of-phase TMF (OP-TMF), and 3) isothermal fatigue (IF). The fatigue response was dependent on the test condition and the maximum stress level during cycling. The IF, IP-TMF, and OP-TMF conditions yielded shortest fatigue life at higher, intermediate and lower stress levels, respectively. Examination of the failure mode through the variation of strain or modulus during cycling, and post-mortem microscopic evaluation revealed that it was dependent on the fatigue condition and applied stress level. Higher stresses, mostly with IP-TMF and IF conditions, produced a primarily fiber dominated failure. Lower stresses, mostly with the OP-TMF condition, produced a matrix dominated failure. Also, an empirical model based on the observed damage mechanisms was developed to represent the fatigue lives for the three conditions examined here.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThermomechanical Fatigue Behavior of a Quasi-lsotropic SCS-6/Ti-15-3 Metal Matrix Composite
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2804361
dc.journal.fristpage109
dc.journal.lastpage117
dc.identifier.eissn1528-8889
dc.keywordsMetal matrix composites
dc.keywordsFatigue
dc.keywordsStress
dc.keywordsFailure
dc.keywordsFatigue life
dc.keywordsFatigue testing
dc.keywordsMechanisms
dc.keywordsFibers AND Laminates
dc.treeJournal of Engineering Materials and Technology:;1995:;volume( 117 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record