Show simple item record

dc.contributor.authorM. E. Walter
dc.contributor.authorG. Ravichandran
dc.date.accessioned2017-05-08T23:47:24Z
dc.date.available2017-05-08T23:47:24Z
dc.date.copyrightJanuary, 1995
dc.date.issued1995
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26969#101_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/115435
dc.description.abstractThe mechanical behavior of a glass-ceramic matrix composite, SiC/CAS (calcium aluminosilicate reinforced with unidirectional SiC fibers), is studied. Results based on uniaxial tension experiments are presented for specimens with fibers aligned in the loading direction. Axial and transverse strain gages on all four gage section surfaces and in situ acoustic emission and ultrasonic wave speed measurements were used to monitor the evolution of damage. All measurements were made with high-resolution, continuous data acquisition. Post-test optical and scanning electron microscopy was also used to identify the various micromechanisms of damage. The experimental results demonstrate the existence of “zones of deformation” which are associated with the onset of different damage mechanisms. It is shown that the observed stress-strain behavior can be explained in terms of the material properties of the matrix and the fiber, the material processing, and the postulated zones of deformation.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Experimental Investigation of Damage Evolution in a Ceramic Matrix Composite
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2804360
dc.journal.fristpage101
dc.journal.lastpage108
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsComposite materials
dc.keywordsCeramics
dc.keywordsGlass
dc.keywordsFibers
dc.keywordsMeasurement
dc.keywordsGages
dc.keywordsStress
dc.keywordsCeramic matrix composites
dc.keywordsResolution (Optics)
dc.keywordsMaterials properties
dc.keywordsAcoustic emissions
dc.keywordsMaterials processing
dc.keywordsMechanical behavior
dc.keywordsScanning electron microscopy
dc.keywordsMicromechanical devices
dc.keywordsStrain gages
dc.keywordsTension
dc.keywordsUltrasonic waves
dc.keywordsMechanisms AND Data acquisition
dc.treeJournal of Engineering Materials and Technology:;1995:;volume( 117 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record