Show simple item record

dc.contributor.authorRobert Greif
dc.contributor.authorBenjamin Hebert
dc.date.accessioned2017-05-08T23:47:24Z
dc.date.available2017-05-08T23:47:24Z
dc.date.copyrightJanuary, 1995
dc.date.issued1995
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26969#94_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/115433
dc.description.abstractThis research combines theoretical and experimental approaches for dynamic material characterization of composite materials. The samples studied include continuous fiber graphite/epoxy beams with various symmetric lay-up configurations. Included are laminated beams with the following lay-ups: [08 /908 ]s , [908 /08 ]s , [(45/0/−45)5 ]s and [(0/45/0/−45)3 /90/0/01/2 ]s . The resonant dwell technique is used to determine the material damping and the real part of the dynamic flexural modulus of double cantilever beam specimens in the first mode of vibration over the frequency range 25 Hz to 300 Hz. The dynamic properties are determined as a function of the frequency of oscillation at room temperature. In addition, the Metravib Viscoanalyzer, based on off-resonance tests, is also used to provide another source of experimental data for comparison. Although the Viscoanalyzer was originally intended for testing viscoelastic polymers, the present research establishes the limits of applicability for composite materials, with particular emphasis on the three point bending test. Comparisons and limitations of both techniques are critically discussed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental Techniques for Dynamic Characterization of Composite Materials
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2804378
dc.journal.fristpage94
dc.journal.lastpage100
dc.identifier.eissn1528-8889
dc.keywordsComposite materials
dc.keywordsFibers
dc.keywordsCantilever beams
dc.keywordsElastomers
dc.keywordsEpoxy adhesives
dc.keywordsDamping
dc.keywordsExperimental methods
dc.keywordsTesting
dc.keywordsVibration
dc.keywordsGraphite
dc.keywordsOscillations
dc.keywordsResonance AND Temperature
dc.treeJournal of Engineering Materials and Technology:;1995:;volume( 117 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record