Show simple item record

dc.contributor.authorC.-C. Chu
dc.date.accessioned2017-05-08T23:47:23Z
dc.date.available2017-05-08T23:47:23Z
dc.date.copyrightJanuary, 1995
dc.date.issued1995
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26969#41_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/115426
dc.description.abstractThe critical plane approach is applied to model material fatigue behavior under any constant amplitude proportional loading. The most critical plane and the largest damage parameter are determined in closed form for six damage criteria that have been proposed in the literature. The correct procedures of utilizing these closed-form solutions to construct the damage parameter versus fatigue life curve are outlined. It is shown that the common practice of characterizing the material’s fatigue behavior by plotting the damage parameter evaluated on the maximum shear plane against the observed fatigue life violates the principle of the critical plane approach, a problem which can arise during the calibration of any biaxial type of damage criterion. The study emphasizes that the critical plane approach should be consistently applied to both the initial calibration and the subsequent fatigue analysis.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFatigue Damage Calculation Using the Critical Plane Approach
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2804370
dc.journal.fristpage41
dc.journal.lastpage49
dc.identifier.eissn1528-8889
dc.keywordsFatigue
dc.keywordsShear (Mechanics)
dc.keywordsCalibration
dc.keywordsFatigue analysis
dc.keywordsFatigue damage AND Fatigue life
dc.treeJournal of Engineering Materials and Technology:;1995:;volume( 117 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record